这里我们按父ID分组,并将coordinate添加到列表中。
“!位置=“-275.7599375937546-275.62840628406309”!顶部_Left=“-275.7599375937546-275.62840628406309”!bottom_right=“154.24006240062462454-274.6284062840639”!边界矩形=“-275.7599375937546-275.62840628406309 430-1”!order=“5000000000022”!跟随anchor=“true”!info_node=“false”!colour=“1,1,0.7843137254901967,0.19607843137254902”!size_policy=“10”!锚定的_node=“16”!/>#你看!我们现在可以根据列表中的值创建垂直线
“!position=“506.36734367343672-325.62890628906308”!top_left=“506.36734367343672-325.62890628906308”!bottom_right=“936.36734367343672-324.62890628906308”!bounding覕rect=“506.36734367343672-325.62890628906308 430-1”!order=“5000000000023”!跟随anchor=“true”!info_node=“false”!colour=“1,1,0.7843137254901967,0.19607843137254902”!size_policy=“10”!锚定的_node=“18”!/>#你看!这要求/假定所有数据都按父ID排序,然后按X、Y、Z的顺序排序。如果x、y和z没有被排序,那么坐标就会变得混乱。
“!位置=“-171.8767187671877-903.13403134031341”!左上角=“-171.8767187671877-903.13403134031341”!bottom_right=“578.12328123281236-953.13403134031341”!bounding“rect=”-171.8767187671877-903.13403134031341 750 50“!order=“5000000000024”!跟随anchor=“true”!info_node=“false”!colour=“1,1,0.7843137254901967,0.19607843137254902”!size_policy=“10”!锚定的_node=“0”!/>#你看!1.0条编码= 美国\u ASCII独立= 不是吗? 几何学 尺寸= 二无效的 几何学 )工厂定义$(Creator_Classic)CreationFactory_Name Creator_Classic_Creator$(Creator_2d3d)$(Creator_Coords)创建\端无输出功能\类型\创建\工厂定义*teefactory工厂\名称Creator_Cloner输入功能\类型\创建\创建ator_coordSysRemover)@coordSys()数量_份6输出特征_类型创建者_创建的FME _特征_类型创建者工厂_定义*分支工厂_名称“创建者_创建的分支器-1 4”输入特征_类型创建者_创建的目标工厂$(wb _当前上下文)_创建者_branch_target“最大_count无输出传递的功能”_type*35;--------------------------------------------------------工厂_def*teefactory工厂_name“$(wb_current_context)_creator_branch_target“输入功能”_type*输出功能_type*---------------------————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————-------如果我们正在进行最后n个功能,然后乘数为0。如果我们先做n,乘数是-1。对于随机数,我们需要将最后一个n视为第一个n(即有一个-1)这就是什么?:包含在比率乘数中。包括[如果-1==0&&原始==原始将“宏实数模式置于最后”;将“宏观实际利率3”;}否则将“宏实模式原始”;输入“宏实际利率[expr 3*(-1”?-1:-1)“;}]工厂定义*采样工厂名称采样命令评估单次通过采样率$(实际采样率)采样率$(实际采样率)采样率$(实际采样模式)输入特征_类型模件计数器_输出采样特征uuuuuu类型采样输出未采样特征u类型采样#需要这个teefactory,因为如果没有指定输出子句,sampler仍将输出特性。这样,即使变压器上没有输出连接,我们也会表现得很好。见pr 28886.factory def*teefactory factory name sampler sampled input feature u typeure_type sampler_not_sampled multi_feature_mode no null_attr_mode no_op attr set_create_directives_propagate_missing_fdiv attr_action_parentid“”设置为“2”输出功能_type attributeCreator_2_输出-————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————utecreator_output------------------------------------------------------工厂定义*teefactory工厂名称连接输入功能_type attributeCreator _output input功能_type attributeCreator _2 _output输出功能_type连接输出--——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————_到“”。 兰德 “输出功能_type attributeCreator_3_output诜诜诜诜Tory Factory_name Aggregator输入功能_type attributeCreator_3_output mode one_level group_by parentid$(Aggregator_break_attr)删除_geometry yes accumulated_attributes none list_name“coordinates”list_attrs_to coordinate id list_attrs_to_include_模式选择的分隔符 输出聚合功能\u类型聚合器\u聚合----------------------------------------------------------------工厂定义*VertexCreatorFactory工厂名称VertexCreator输入功能\u类型聚合器\u聚合模式添加索引” “continue_on_error yes xval”@evaluateexpression(fdiv,float, 价值 协调 0 .坐标 ,vertexcreator)“yval”@evaluateexpression(fdiv,float, 价值 协调 1个 .坐标 ,vertexcreator)“zval”@evaluateexpression(fdiv,float, 价值 协调 二 .坐标 ,vertexcreator)“输出输出功能”_type vertexcreator_output请参见controlDefs.cpp-controlDefs::writeVisualizerTempDirDefault_Macro Workspace_Temp_DirInclude[设置安全名称][regs亚搏在线ub-所有[^a-za-z0-9]VertexCreator_Output uuu[expr Round(rand()*1000000)]uu[时钟单击-毫秒]“;输入“macro-saf亚搏在线e-ffs-name$safename”;]工厂定义*检查员工厂名称VertexCreator_Output_Prepper Command_Parm_Evaluation Single_Pass Input Feature_Type VertexCreator_Output Group_attribute_u Inspector_Feature_Type_Attr_uuuGroup_by Group_attribute_prefix VertexCreator_Output_Raster_Reducion去教育点云减少无减薄输出结果特征类型视图现在将所有特征路由到记录器中,将其功能类型更改为Transformer名称,以便查看nicelydefault_宏可视化工具_feature_file$(workspace_temp_dir)/$(safe_ffs_name).ffsdefault_宏可视化工具_create_spatial_index n亚搏在线o[pr]数据检查器将限制在win32上读取的最大功能数。因此,我们将相应地限制我们在这里记录的功能的数量,使用max_features_to_record directive.factory_def*recorderFactory_name vertexcreator_output_recorder command_parm_evaluation single_pass input feature_type_uuuviewme_uuwb_termination_feature yes@FeatureType(Terminator_@Value(WB_Termination_Xformer))输入功能_Type_ViewMe_uU@FeatureType(@Value(UInspector_Feature_Type_Attr_UuUuU))@删除属性(UInspector_Feature_Type_Attr_UuU)功能_File“$(Visualizer_Feature_File)”存储扫描的_Schema是创建空间al_index“$(Visualizer_create_spatial_index)”inspector“$(Visualizer_create_spatial_index)”fsc_schema parentid,varchar 255个 模式记录存储_扫描的_元数据记录_直接_到_磁盘是最大_功能_到_记录win32 2000000----------------------------------------------------------------工厂_def*路由工厂_name“目标功能类型路由相关器”命令_parm_评估single _pass input feature_type*feature_type_attribute uwb_out_feature_type_uuuuuu output routed feature_type*output not_routed feature_type uu nuke_me_uuuuuuuxTcl2(“FME_statmessage 818059[FME_getattribute FME_template_feature_type]818060 818061 FME_warn”)\——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————TS$(workspace_temp_dir)]设置文件[glob-nocomplain-directory$(workspace_temp_dir)-tails*.ffs];如果[长度$files]==1设置文件$(workspace_temp_dir)/附加文件[lindex$files 0];eval fme_execute system \173\042$(fme_home_unix)/fmedatainspector \042--可视化工具--单个应用程序--关闭时删除--无源提示-f ffs \042$thefile \042&\175;}elseif[长度$files]==0 catch文件删除-强制$(工作区临时目录)}else设置文件noext设置最后一个文件foreach filename[lsort$files]set filenoext[string trimright$filename.ffs];if[regexp(.*)uu[0-9]*$$filenoext wholething filenoextbase]if$filenoextbase==$lastfile continue设置lastfile$filenoext;lappend filesnext$filenoext_eval fme_execute system \173\042$(fme_home_unix)/fmedatainspector \042--可视化工具--单个应用程序--关闭时删除--无源提示-d$(workspace_temp_dir)-a ffs-f ffs$filesnext&\175;}(二)}(二)“)工厂定义*teefactory输入功能\u类型\u Nukeme__