span8
span4
我使用的模板。DWG file to define the Linetype for the ROUTE feature, i will need to increase the width of the ROUTE based on the NO_OF_WAYS Attribute(Below is the table mapping).请让我知道我如何才能实现这在FME桌面2016。在附route-dwg-file.jpg文件,我应该有路由特征宽度增加到0.8毫米因此,5根电缆(4根低压电缆为橙色,1根高压电缆为红色)应显示为进入线路内部。
NO_OF_WAYS | 宽度(地面米) |
1 | 0.3 |
2、3 | 0.55 |
4、5 | 0.8 |
6、7 | 1.05 |
8 | 1.3 |
任何帮助都将非常感谢。
您好,Anil Kumar K B
©2019安全亚搏在线软件公司法律