方面
autocad_entity:autocad_dimension.
尺寸是AutoCAD中使用的聚合功能,以在AutoCAD绘图中指定尺寸。尺寸特征具有下面描述的属性。
对齐尺寸:
DEFPT2.
是第一延长线的终点。DEFPT3.
是endpoint of the second extension line.Dimlineft.
指定维度行。
旋转(线性)尺寸:
- 第一个扩展线由DEFPT2。
- 第二个扩展线由DEFPT3。
- 尺寸线是指定的Dimlineft.。
角尺寸:
DEFPT2.
是第一延长线的开始。DEFPT3.
是第一延长线的终点。DEFPT4.
是startpoint of the second extension line.Dimlineft.
是endpoint of the second extension line.ArcDefpt.
指定尺寸线弧。
角度3点尺寸:
DEFPT2.
是第一延长线的终点。DEFPT3.
是endpoint of the second extension line.DEFPT4.
是弧的中心点。Dimlineft.
指定尺寸线弧。
直径尺寸:
DEFPT4.
是在圆圈或弧形上选择的点。Dimlineft.
从选择点完全绕过圆的点。
径向尺寸:
DEFPT4.
是在圆圈或弧形上选择的点。Dimlineft.
是圆圈或弧的中心点。
直径尺寸:
- DEFPT4.是在圆圈或弧形上选择的点。
- Dimlineft.从选择点完全绕过圆的点。
纵坐标:
DEFPT2.
是选择的点。DEFPT3.
是领导者的终点。Dimlineft.
是origin definition point of the dimension.
电弧长度尺寸:
DEFPT2.
是第一延长线的终点。DEFPT3.
是endpoint of the second extension line.DEFPT4.
是弧的中心点。Dimlineft.
指定尺寸弧。
属性名称 |
内容 |
autocad_actual_measurement. |
X方向插入块的比例因子。 范围:64位浮点数 默认值:1 |
autocad_arc_defpt.x |
This defines the dimension arc for an angular dimension. This is equivalent to the 16,26,36 group in DXF. 范围:64位浮点数 默认值:无 |
autocad_arc_defpt2.x |
定义点。This is equivalent to the 13,23,33 group in DXF. 范围:64位浮点数 默认值:无 |
autocad_arc_defpt3.x. |
定义点。这相当于DXF中的14,24,34组。 范围:64位浮点数 默认值:无 |
autocad_arc_defpt4.x. |
定义点。这相当于DXF中的15,25,35组。 范围:64位浮点数 默认值:无 |
autocad_dim_arc_is_partial. | 弧长尺寸标志,指示电弧仅由两个点指定。 Range: 0 for false | 1 for true 默认值:0 |
autocad_dim_arc_start_param. | The arc parameter for the arc corresponding to the start point of the arc length dimension. 范围:64位浮点数 默认值:0.0 |
autocad_dim_arc_end_param. | The arc parameter for the arc corresponding to the end point of the arc length dimension. 范围:64位浮点数 默认值:0.0 |
autocad_dim_arc_symbol_type. | The indicates the use of an arc symbol with the text of an arc length dimension, as defined 0 = arc符号前面的文本 1 =弧符号是高于文本 2= no arc symbol is used 范围:0..2 默认值:无 |
autocad_dim_leader_pt1.x. autocad_dim_leader_pt1.y. autocad_dim_leader_pt1.z. |
Start point for an optional extra leader for an arc length dimension. 范围:64位浮点数 默认值:无 |
autocad_dim_leader_pt2.x autocad_dim_leader_pt2.y autocad_dim_leader_pt2.z |
End point for an optional extra leader for an arc length dimension. 范围:64位浮点数 默认值:无 |
autocad_dimension_attach_point. |
这是定义的尺寸的附件点
|
autocad_dim_arrowhead_pt_ autocad_dim_arrowhead_pt_ |
这些属性由读者提供但不由作者使用,描述了每个箭头上的顶点的x,y坐标,可以称为“箭头尖端”。 |
autocad_dimension_flag. |
这是AutoCAD文件的原始值,指示维度类型。请参阅AutoCAD_dimension_type以获取此项的解码版本。 |
autocad_dimension_style_name. |
使用的尺寸样式的名称。使用AutoCAD Writer时,重要的是在模板文件中定义了使用的维度样式;否则,不会设置任何样式,并且不会显示维度文本。即使使用标准维度样式,模板文件也必须保持其定义。 |
autocad_dimension_type. |
This indicates the type of the autocad dimension. Possible values are: autocad_rotated. |
autocad_leader_length. |
This is the length of the dimension leader line. |
autocad_linespace_style. |
这是线间距的风格。它是1(至少)或2(精确)。 |
autocad_linespace_factor. |
使用的默认线间距的百分比。 范围:0.25..4.0 默认值:1 |
autocad_rotation_angle. |
The rotation angle of the dimension. |
autocad_text_midpoint.x. |
The midpoint of the text. |
autocad_text_rotation |
维度文本的旋转。 |
autocad_text_size. |
地面单位中文的大小。 |
autocad_text_string |
The dimension text value. |
autocad_ucs_xangle |
The angle of the ucs (user coordinate system) when the dimension was created. |