特征表示
除了FME Workbench添加到所有功能的通用FME功能属性之外(参见About Feature Type Attributes), this format adds the format-specific attributes described in this topic.
FME中创建的每个功能对应于一个数据记录或全部标题记录。
有许多P190数据记录类型,每个数据字段都有不同的数据字段。每个记录类型对应于FME中的功能类型。相应的功能类型将数据字段存储为属性。在某些情况下,其他特定于位置的信息将被存储为特征类型的几何图形的特征。
目前数据记录类型“接收器组记录(3-D海上调查)”和“关系记录(3-D海上调查)不受支持。如果添加数据记录类型,请联系Safe@support.com。亚搏在线
这tables below list the FME feature types for “Type 1: Grid or Geographical Coordinates” and “Type 2 data record types, and the attributes each produces.
功能类型 |
属性 | 内容 |
---|---|---|
p190_coordinates_points_record. (读者) p190_coordinates_record (在作家) |
p190_type. | This will always be p190_point. |
p190_record_data. | 数据记录整体。 Range:Alphanumeric string of 80 characters 默认:没有默认 |
|
p190_filename. | 调查的文件名。 Range:任何字母数字字符串 默认:没有默认 |
|
p190_record_identifier | Record identification character Range: 's'(源头中心)| 'g'(接收器组)| ‘Q’ (Bin Centre) | ‘A’ (Antenna Position) | 't'(尾部浮标位置)| 'C'(常见的中点)| ‘V’ (Vessel Reference Point) | ‘E’ (Echo Sounder) | 'z'(其他) 默认:没有默认 |
|
p190_line_name. | Line name Range:任何12个字符的字母数字字符串。 默认:没有默认 |
|
p190_vessel_id. | 船舶ID Range:任何字母数字字符 默认:没有默认 |
|
p190_source_id. | 源ID范围:任何字母数字字符 默认:没有默认 |
|
p190_other_id. | 尾部浮标或其他身份证 Range:任何字母数字字符 默认:没有默认 |
|
p190_point_number. | 点数 Range:六个字符的任何字母数字字符串 默认:没有默认 |
|
p190_ltate | 十进制度或毕业范围的纬度:任何实数默认值:否默认 | |
p190_ltate_dir | 上面指定的纬度的n / s方向。 Range:n或s 默认:没有默认 |
|
p190_longitutde. | 程度的程度或毕业, Range: Any real number 默认:没有默认 |
|
p190_longitude_dir | E / W上面指定的经度方向。 Range:W或S. 默认:没有默认 |
|
p190_angular_units. | 纬度和经度测量的单位。 Range:度|毕业生 默认:DEGREES |
|
p190_easting. | 地图网格东方。 范围:任何实数(米)或任何整数值(非度量) 默认:没有默认 |
|
p190_northing. | Map grid Northing. Range:任何实数(metres) or any integer value (non metric) 默认:没有默认 |
|
p190_grid_units | 用于X-Y电网测量的单位。 Range:指标|不合格 默认:公制 |
|
p190_depth. | 水深或高度 Range:任何实数(定义垂直数据)或任何整数值(非度量) 默认:没有默认 |
|
p190_height_units | 用于X-Y电网测量的单位。通常与p190_grid_units相同 Range:指标|不合格 默认:公制 |
|
p190_date. | Julian day of the year Range:1至366,包容性。 默认:没有默认 |
|
p190_time. | 几小时内,几分钟,几秒钟,相应于GMT或P190_GMT_OFFSET中定义 Range:任意三个两位数整数数字 |
功能类型 |
属性 | 内容 |
---|---|---|
p190_offset._points_record (读者) p190_offset_record. (在作家) |
p190_type. | This will always be p190_point. |
p190_record. | 数据记录整体。 Range:Alphanumeric string of 80 characters 默认:没有默认 |
|
p190_filename. | 调查的文件名。 Range:任何字母数字字符串 默认:没有默认 |
|
p190_time_definition. | GMT的时钟时间(GMT的时钟显示为GMT表示为GMT + N小时) Range:任何长度为48的字母数字字符串 默认:没有默认 |
|
p190_record_type_identifier | 记录标识字符。这将永远是“l”。 |
|
p190_record_identifier | Record identification character Range: 's'(源头中心)| 'g'(接收器组)| ‘Q’ (Bin Centre) | ‘A’ (Antenna Position) | 't'(尾部浮标位置)| 'C'(常见的中点)| ‘V’ (Vessel Reference Point) | ‘E’ (Echo Sounder) | 'z'(其他) 默认:没有默认 |
|
p190_line_name. | Line name Range:任何12个字符的字母数字字符串 默认:没有默认 |
|
p190_point_number. | 点数 Range:六个字符的任何字母数字字符串 默认:没有默认 |
|
p190_point_suffix. | 用于分数间隔或点描述符的点数的后缀 Range:任何三个字符的字母数字字符串 默认:没有默认 |
|
p190_northerly_offset. | Offset of point from reference point in Northerly direction. Positive represents North; Negative represents South. Range:任何实数 默认:没有默认 |
|
p190_easterly_offset. | 从回到方向的参考点的点偏移。积极代表东方;负面代表西方。 Range:任何实数 默认:没有默认 |
|
p190_depth. | 海拔或水深。 Range:任何实数 默认:没有默认 |
|
p190_reference_name. | 参考点的名称 Range:任何16个字符的字母数字字符串。 默认:没有默认 |
|
p190_reference_lattitude | 参考点纬度以度为单位,分钟,秒,单个方向字符。 Range:Two two-digit numbers, followed by a real number, ending with either “N” or “S”. 默认:没有默认 |
|
p190_reference_longitude | Reference point longitude in degrees, minutes, seconds with a single direction character. Range:Two two-digit numbers, followed by a real number, ending with either “E” or “W”. 默认:没有默认 |
功能类型 |
属性 | 内容 |
---|---|---|
p190_control_file_lines_record. | p190_type. | This will always be p190_line |
p190_record_type. | 记录标识字符。 Single character identifier for the type of record this is. |
|
p190_line_name. | Line name Range:任何字母数字字符串of a length specified in the control file. 默认:没有默认 |
功能类型 |
属性 | 内容 |
---|---|---|
p190_control_file_points_record. | p190_type. | This will always be p190_point. |
p190_ltate | Latitude in decimal degrees or grads Range:任何实数 默认:没有默认 |
|
p190_longitude | 程度的程度或毕业, Range:任何实数 默认:没有默认 |
|
p190 _easting. | 地图网格东方。 Range:任何实数(metres) or any integer value (non metric) 默认:没有默认 |
|
p190 _竞选 | Map grid Northing. Range:任何实数(metres) or any integer value (non metric) 默认:没有默认 |
|
p190 _ depth. | 水深或高度 Range:任何实数(定义垂直数据)或任何整数值(非度量) 默认:没有默认 |
|
p190 _point_number. | 点数 Range:任何字母数字字符串of a length specified in the control file. 默认:没有默认 |
|
p190_line_name. | Line name Range:任何字母数字字符串of a length specified in the control file. 默认:没有默认 |
|
p190_filename. | 调查的文件名。 Range:任何字母数字字符串 默认:没有默认 |
功能类型 |
属性 | 内容 |
---|---|---|
p190_coordinates_lines_record. (仅限读者) |
p190_line_name. | Line name Range:任何12个字符的字母数字字符串。 默认:没有默认 |
p190_type. | 这将永远是p190_line。 |
|
p190_record_identifier | Record identification character Range: 's'(源头中心)| 'g'(接收器组)| ‘Q’ (Bin Centre) | ‘A’ (Antenna Position) | 't'(尾部浮标位置)| 'C'(常见的中点)| ‘V’ (Vessel Reference Point) | ‘E’ (Echo Sounder) | 'z'(其他) 默认:没有默认 |
|
p190 _longitude_dir | E / W上面指定的经度方向。 Range:W或S. 默认:没有默认 |
|
p190 _latitude_dir | 上面指定的纬度的n / s方向。 Range:n或s 默认:没有默认 |
|
p190_filename. | 调查的文件名。 Range:任何字母数字字符串 默认:没有默认 |
功能类型 |
属性 | 内容 |
---|---|---|
p190_offset._lines_record (仅限读者) |
p190_line_name. | Line name Range:任何12个字符的字母数字字符串。 默认:没有默认 |
p190_record_identifier | 记录标识字符。这将永远是“l”。 |
|
p190 _longitude_dir | E / W上面指定的经度方向。 Range:W或S. 默认:没有默认 |
|
p190 _latitude_dir | 上面指定的纬度的n / s方向。 Range:n或s 默认:没有默认 |
|
p190_filename. | 调查的文件名。 Range:任何字母数字字符串 默认:没有默认 |
每个P1 / 90文件都包含多个标题记录,该记录累积到一个FME功能类型中。每个不同的标头都被解析为与标题记录类型相对应,并且字段存储为标题特征类型上的列表属性。对于标题功能类型,p190_type.will always bep190_none.。
这default value for non-coordinate system related records (datum, projection, and units) is “N/A”.
这default for datum is WGS-84.
投影的默认值为UTM。
单位的默认值为度量标准和度。
笔记:
这reader header feature will produce the attributes标题_description.for thep190_onboard_system.and for thep190_offset.records. This is to allow the header descriptions for those fields to be written out if a file is round-tripped through FME.
虽然这些属性未显示在模式上,但不会为其他字段自动创建,而且可以以手动添加的形式
p190_issue_date {0} .header_description
在哪里p190_issue_date是所需的页眉记录。
这writer will look for these attributes and write them out if they exist; otherwise, it will write out default values.
这re is also aheader_last_digits.attribute for thep190_offset.和p190_sgsi_comment记录:这决定了H09xx值的最后两位数和H800x值的最后一个数字。这header_last_digits.attribute will only work for these two record types.